1. This aircraft is suitable for the female high-heeled shoes and the male woman's boot class before forming a group to instep moulding work.
2. The jelly mold uses the wear-resisting heat-resisting silica gel; Outside the aluminum mold temperature may reach 200℃.
3. After the moulding,in the unlined upper garment pastes entire close, the corrugation, does not distort, does not bubble, and may reduce the breakage.
4. But the prompt modulding pulls, reduces the sample development time, reduces the cost, and can the better satisfied customer request.
5. The shoes back's accurate stereotypical change raises the Productivity.
6. The stamping die may adjust at will achieves the different need the clearance, pastes the shoetree.
|
Dimension
|
Voltage
|
Weight
|
Heating System
|
Air pressure
|
|
700X600X1700mm
|
220V/50HZ
|
200kg
|
1.2KW
|
0.6MPa
|
